EQUIPMENT SERIES
MET Compact Vibration Systems
Provide a vibration source for accelerometer calibration, lightweight-part testing, fatigue tests, mechanical-impedance tests and teaching laboratories.
MET55 / MET30 / MET10
APPLICATIONS
Where it fits
- Provide a vibration source for accelerometer calibration, lightweight-part testing, fatigue tests, mechanical-impedance tests and teaching laboratories.
SYSTEM DETAILS
Equipment and functions
- Compact shaker and amplifier configuration.
- 220 V supply.
- System may combine the shaker, amplifier, controller, signal generator and accelerometer.
SELECT A MODEL
Specifications & configurations
Compare models side by side. On smaller screens, swipe within the table; the parameter column stays in place.
Catalog specifications are shown for model selection. Confirm the configuration, units and test conditions in your quotation. Fields marked “Confirmation required” need an agreed specification before ordering.
| Parameter | MET55 | MET30 | MET10 |
|---|---|---|---|
| Maximum force | Confirmation required | Confirmation required | Confirmation required |
| Frequency range (Hz) | 5–5000 | 5–6500 | 5–10000 |
| Maximum acceleration (g) | 30 | 35 | 35 |
| Maximum velocity (m/s) | 1.3 | 1.5 | 1.5 |
| Maximum displacement (mm p-p) | 20 | 12 | 10 |
| Payload (kg) | 20 | 1 | 1 |
| Armature mass (kg) | 1.8 | 0.45 | 0.3 |
| Shaker dimensions (mm) | 380 × 330 × 445 | 200 × 265 × 200 | 184 × 95 × 188 |
| Shaker weight (kg) | 97 | 16 | 15 |
| Cooling | Air-cooled | Air-cooled | Air-cooled |
| Power amplifier | PA103EF | PAS801 | PAS501 |
| Power supply | AC 220 V ±10%, 60 Hz | AC 220 V ±10%, 60 Hz | AC 220 V ±10%, 60 Hz |
BEFORE ORDERING
Configuration & confirmation notes
- Confirm the force rating and its units for MET55, MET30 and MET10 before selecting the system.
- Maximum force: confirm the required rating and configuration before ordering.